| BRAND | Beamex |
| Product | B-010 |
| Description | PGM, BEAMEX-Kalibrierhandpumpe for pneumatic generation of test pressures up to 20 bar. The Vario volume used for fine adjustment; up to 0.1 mbar. About the vent valve of the pressure built up can drained finely adjusted will. A so-called. Up / Down test is perfectly possible. Pressure connections: 1/8 "NPT inside. |
| Internal code | IMP199184 |
| Weight | 1 |
Please Contact Us to Order to offer competitive prices and delivery time for Beamex - B-010 PGM, BEAMEX-Kalibrierhandpumpe for pneumatic generation of test pressures up to 20 bar. The Vario volume used for fine adjustment; up to 0.1 mbar. About the vent valve of the pressure built up can drained finely adjusted will. A so-called. Up / Down test is perfectly possible. Pressure connections: 1/8 "NPT inside. number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Suomi Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Pressure connection PQCM1 (7,126,060), for BEAMEX-calibration MCS100 (Older version)
Swagelok connector 1/16 to 4/2 Polyflow hose
Adapter base 1/4 "NPTA to R1 / 8" -60 ° Beamex cone a (7,113,300), max. Pressure 20 bar
Adapter base 1/8 "NPTA to R1 / 8" -60 ° Beamex cone a (7113260)
Double nipple R 1/8 "a 60 ° cone (7,113,250)
Adapter base 1/4 "NPTA to R1 / 8" -60 ° Beamex cone a (7,113,300), max. print 20 bar
Adapter base 1/8 "NPTA to R1 / 8" -60 ° Beamex cone a (7113260)
Double nipple R 1/8 "a 60 ° cone (7,113,250)
Adapter tube Beamex R1 / 8 "-60 ° cone on Swagelok-compatible Connections "Quick Connect" 1/16 "(8,009,426); pre-assembled with about 15 cm long tube
Schraubkupplung
Adapter for the connection of a barometric module with a 20 4/2 bar Polyflow hose
Adapter for the connection of a barometric module with a 7 6/4 bar tube
Hose 4/2 Beamex with tee 8009437
Beamex hose extension 1.5m Fabric tube fixed pressure and temperature (-10 ... 50 ° C, up to 20bar) with Terminal adapters (Beamex 60 ° cone) on both sides.
0.75 m fabric tube fixed pressure and temperature (-10 ... 50 ° C, up to 20bar) With Terminal adapters (R 1/8 "60 °), and 8,009,418 Adapter base R1 / 8 "-60 ° cone to 1/4" male NPT.
1.5m fabric tube fixed pressure and temperature (-10 ... 50 ° C, up to 20bar)
PRESSURE TUBE 3814-6 (6/4) 20bar Material: urethane
Tee for 6/4 mm tube with fittings, 7,135,050
High-pressure hose set 1,000 bar for PM600 modules Hose length 1 m and 2 Adapter
Braces for 4/2 pressure hose 3814-7 7142100
Tee for pressure hose Clippard 3814-7 (4/2) complete with grommets
Hydrotech hose set for high pressure INT modules Consisting of: 1 St. threaded MINMESS 1215 G1 / 8 " (Is screwed into the pressure connection of the module INT) 1 St. hose MINIMESS 1215, 1 m 1 St. threaded MINIMESS 1215 to 1/4 "NPT (To the DUT)
